We don't have a system that is quite as precise a fit as what you are asking for a bed extender on your Nissan Frontier. The bed extender we have that is most likely to meet your needs is the Malone Axis Truck Bed and Roof Extender # MPG907. This is only because of the goal post style carrier to give you that increased height. Along with the 7 inches of vertical adjustment to meet the bed of your truck. You would still need to have a cross support for this functionality on the extender. view full answer...
If you have a 2 inch trailer hitch receiver on your truck, then you may be interested in the Erickson Big Bed Junior Load Extender # EM07605. This product will extend past your tail gate to carry items such as ladders or a kayak.
You may also be interested in the Malone Foam Kayak Block, # MPG172. This will protect the hull of your kayak from the metal crossbar. view full answer...
The Erickson Big Bed Load Extender part # EM07600 is a bed extender only. That said, we have plenty of options which are both a bed extender and roof extender like the Erickson Big Bed Junior part # EM07605 or the Malone Axis Truck Bed and Roof Load Extender part # MPG907. view full answer...
Yes, the spray in bed liner and Ford bed extender are both perfectly compatible with the DeeZee Truck Bed Mat # DZ86929. There would be plenty of clearance for all three things to be installed at same time. view full answer...
The kayak can indeed be carried in the truck bed and then the bow/stern secured with a load extender like the Malone Axis Truck Bed and Roof Load Extender part # MPG907. The only downside of this option as opposed to securing the kayak to the roof is that you lose bed space. The great thing about the Malone Axis Truck Bed and Roof Load Extender is that is can be used when securing the kayak to the roof as well if you change your mind. view full answer...
The Curt # C57WR Universal Truck Bed Extender will fit most full size trucks and provide 26 inches of additional storage space. I have inclueded a video demo. view full answer...
I reccomend the Curt # C57WR Universal Truck Bed Exender which will fit nearly all full size pickup trucks including Chevrolet, GMC, Ford, Dodge, Ram, and Nissan, with standard 60" wide tail gates. (6.5 foot and longer beds) and provide 36-1/2 inches of additional bed length for storage and hauling. May not work with flare-style tailgates. Compatible with most tonneau covers view full answer...
In order for the bed extender and the tonneau to work together the bed extender will have to be adjusted 4 inches narrower. The adapter part # 834532006946 allows it to be adjusted narrower and still install to the truck. view full answer...
Yes since your 2008 Toyota Tundra has a standard full size length tailgate the Curt Universal Truck Bed Extender with Fold-Down Tailgate # C57WR that you referenced would fit it. view full answer...
We have an 18 inch extension for 2 inch hitches like the part # C45796 which should give you enough clearance with the Malone Axis Truck Bed and Roof Extender part # MPG907 to use it in the vertical position and still open the tailgate.
You should note though that when you use an extender like this you end up cutting the capacity of the hitch it's installed in by 50 percent. view full answer...
Yes, for just the bed extender the part number is # EM07605. This is the Erickson Big Bed Junior Load Extender for Truck Bed or Roof. It is for 2" Hitches and can carry 350 lbs. view full answer...
For your 2022 Ram 3500 8 foot bed with a step that extends from the cab under the truck bed, I recommend the HappiJac Truck-Mounted Camper Tie-Downs, # LC236326-205221. The HappiJac Direct-to-Frame design ensures proper distribution of your camper's weight. The I-beam stabilizing bar installs horizontally between the front brackets to help create a truss-like structure that spans the width of your bed, down to both corners of your bumper, where the rearmost tie-downs install. Holding the... view full answer...
Yes, the Darby Extend-A-Truck Kayak Carrier # DTA944-968-924 that you referenced will fit your 2012 Chevy Colorado as long as you have a hitch installed like the Curt # 13252 and can be used in the roof rack configuration or you can use the upright in the lower position so that it can extend the truck bed. view full answer...
The Yakima LongArm Truck Bed Load Extender - 2" Hitches - Aluminum - 300 lbs # Y01149 that you were looking at is only suitable for truck bed-height loads. For a cab-height load you will want to go with the Yakima LongArm Bed and Roof Load Extender for 2" Hitches - Aluminum - 165 lbs # Y01149-1150.
I also recommend adding Crossbar Pad # Y07417 to prevent your canoe or other items from getting scratched. This measures 28" long and wraps around the Yakima Longarm crossbar. You could also... view full answer...
You would need adapter # HTAD since all of the trailer hitches for the 2005 Kia Rio are Class I trailer hitches. The use of an adapter or extender reduces the tongue weight capacity of the trailer hitch by 50 percent.
So if you installed a trailer hitch with a 200 pound tongue weight but then used the adapter, the 200 pound capacity would be reduced to 100 pounds. The combined weight of the load extender and anything on it would have to be less than 100 pounds. view full answer...
In order to haul two kayaks in your 2016 Toyota Tacoma without placing them on the roof of your vehicle, you will need to use a load extender such as the Malone Axis Truck Bed and Roof Load Extender part # MPG907 if the bed of your truck is empty. The extender can be positioned for both vertical and horizontal load extensions. In your case, you will want to place the kayaks flat in the bed.
This will not interfere with your tri-fold tonneau cover and will safely allow you to haul the two... view full answer...
I do have a solution for you, however all of the TorkLift Custom Tie-Downs available for your 2017 Ford F-350 are designed for trucks without an extended step underneath the truck bed.
Since you do have a step underneath the bed on your truck, I recommend looking at a universal system like the Brophy Clamp On Camper Tie-Downs # HSSF. These sturdy tie-downs will securely clamp onto the truck's bed side rails for a no-drill installation. These will work on your truck as long as the external... view full answer...
That's a hard question to answer since it's a very unique application of the Yakima LongArm Truck Bed Load Extender # Y01149 and it's on a vehicle we've never test fit it on. The good news is that if you are willing to remove your tailgate you'd be totally fine. So even if you get it and you don't have the clearance with the tailgate folded down you could take off the tailgate and you'd have it.
On most newer trucks that have taller tailgates I'd say what you are trying to do wouldn't... view full answer...
For towing a trailer that heavy and needing a hitch extender that long you would have to use the Torklift hitch extender part # TLE1536 that you referenced. To use this extender you would also need to install a Torklift hitch like the part # TLC1208 for if you have a long bed truck or part # TLC1209 for if you have a short bed truck. There isn't a similar length extender with the needed weight capacity that would work directly with your Class IV hitch. view full answer...
We do have a creative solution for you. Unfortunately we do not carry any mounting brackets for your extender. The closest thing we have that works for your extender is the TruXedo Truck Luggage SaddleBag Rail Mounted Storage Box # TX1705213. The SaddleBag comes with internal dimensions of 18" long x 6" wide x 12-1/2" tall and is compatible with most tonneau cover truck caps.
For another route, we also have the TruXedo Bulkhead Tray for Truck Beds - 24-1/2" Long x 12-1/2" Wide # TX1704900.... view full answer...
Go To Results